DETERMINATION OF THE NECESSARY QUANTITY OF SPARE PARTS TO MAINTAIN THE PERFORMANCE OF DEVICES
https://doi.org/10.51955/2312-1327_2023_3_6
Abstract
The paper is a logical continuation of a series of publications devoted to solving roblems aimed at managing the process of assessing the production of non-conforming products through the use of statistical methods. This paper presents mathematical models for determining the required quantity of spare parts for devices consisting of a large number of identical units and assessing the dependence of the quantity of spare units on the number of operating devices and repair teams servicing them. The developed mathematical models are universal and can be used for any industry: aviation, atomic, chemical industry, etc.
About the Authors
N. S. Khersonsky
SOYUZCERT LLC
Russian Federation
Russian Federation
Nikolai S. Khersonsky, Candidate of Technical Sciences, General Directo
7, building 30, Viktorenko St. Moscow, 125167
L. G. Bolshedvorskaya
Moscow State Technical University of Civil Aviation
Russian Federation
Russian Federation
Ludmila G. Bolshedvorskaya, Professor of the Department of BP&ZhD
Kronstadtsky boulevard, 20 Moscow, 125493
References
1. Averchenkova E. E., Shabanov A. A. (2021). The method of forming the optimal set of spare equipment in the organizational and technological system for providing mechanical assembly at the enterprises of the automotive cluster. Proceedings of the South-Western State University. 25(4): 201-219. (In Russian)
2. Baranovich I. S. (2010). Determination of the optimal reserve of unreliable blocks for the fleet of computers of the EKSTU. Bulletin of the EKSTU. Mathematics and physics. 1: 180-186. (In Russian)
3. Bogdan A. N., Polyakov A. P., Chernobaev A. Yu. (2019). The method of formation and replenishment f a set of spare parts for technological equipment of rocket and space complexes, taking into account the availability of purchased components. Modern high-tech technologies. 5: 15-19. (In Russian)
4. Bondareva G. I., Pegushin A. V. (2015). Modeling of the process of suitability of working bodies of technological equipment of environmental engineering machines. International scientific journal "Symbol of Science". 10-2: 93-98. (In Russian)
5. Evstifeev A. A., Nikoruk I. F. (2022). Optimization of the volume of spare parts and parts for automobile cryogenic gas filling stations operating in various climatic conditions. In the collection: Actual problems of management in Russia and abroad. Collection of scientific works of the interuniversity round table. Moscow. 101-109. (In Russian)
6. Gnedenko B. V., Belyaev Yu. K., Solovyov A. D. (1965). Mathematical methods in reliability theory. Moscow: Nauka, 1965. 524 p. (In Russian)
7. Gnedenko B. V., Kovalenko I. N. (1966). Introduction to the theory of queuing. Moscow: Nauka, 1966. 53 p. (In Russian)
8. Kamenetskaya N. V., Medvedev O. M., Hitov S. B., Silnikov M. V. (2019). The methodology for substantiating the reserve of spare parts for the operation of special equipment during the liquidation of an emergency. Fire and explosion safety. 28(3): 6-13. (In Russian)
9. Khersonsky N. S., Proshin V. V. (2013). Methods for collecting and processing primary information about the reliability of the functioning of products. Statistical models of failures in the functioning of elements of complex production systems. Moscow: EcoPress, 2013. 168 p. (In Russian)
10. Khinchin A. Ya. (1963). Works on the mathematical theory of queuing. Moscow: FIZMATGIZ. 1963. 236 p. (In Russian)
11. Klimovich A. V., Sosnov R. V. (2021). Calculation of the required number of aircraft engines, aircraft equipment units necessary to ensure the daily activities of the aviation unit. Actual problems of armed struggle in the aerospace sphere. 14-16. (In Russian)
12. Lanin A. V., Sukyasov S. V., Naumov I. V., Podyachikh S. V. (2017). Calculation of economic characteristics when planning the number of spare equipment in an electric grid company. Climate, ecology, agriculture of Eurasia : Materials of the international scientific-practical conference, Ulaanbaatar, May, 30–31, 2017. Ulaanbaatar: Mongolian University of Life Science. 126-134. (In Russian)
13. Ozernoy N. A., Dronov V. V., Krymov A. V. (2018). Logistic approach to optimizing the distribution of spare parts and assemblies of technical systems according to the levels of their storage. Vestnik of Voronezh State Agrarian University. 1(56): 180-187. (In Russian)
14. Saaty T. L. Elements of the theory of queuing and its applications. Moscow: Soviet radio, 1965. 520 p.(In Russian)
15. Salimova T. A., Vatolkina N. Sh. (2018). Quality management in the context of transition to Industry 4.0. Standards and quality. 6: 58-62. (In Russian)
16. Schwab K. (2016). The Fourth Industrial Revolution. Eksmo, 2016. 138 p. (Top Business Awards) ISBN 978-5-699-90556-0. (In Russian)
17. Shor Ya. B. (1962). Statistical methods of analysis and quality control and reliability. Moscow: Soviet radio, 1962. 553 p. (In Russian)
18. Tarabanova V. V., Sineva E. A., Andreevskaya A. N., Tarabanov I. M., Vishniak S. N. (2016). Ensuring the stable operation of equipment in an aviation company. Bulletin of the Engineering School of the Far Eastern Federal University. 3(28): 92-98. (In Russian)
19. Zheleznyakov A. O., Sidorchuk V. P., Podrezov S. N. (2022). Simulation model of the system of maintenance and repair of radio-electronic equipment. Proceedings of the MAI. 123. DOI 10.34759/trd-2022-123-26. (In Russian)
Review
For citations:
Khersonsky N.S., Bolshedvorskaya L.G. DETERMINATION OF THE NECESSARY QUANTITY OF SPARE PARTS TO MAINTAIN THE PERFORMANCE OF DEVICES. Crede Experto: transport, society, education, language. 2023;(3):6-21. (In Russ.) https://doi.org/10.51955/2312-1327_2023_3_6
Views:
10
JATS XML
Email this article 