Statistical methods for inspection of pressed parts
https://doi.org/10.51955/2312-1327_2025_3_56
Abstract
A review of publications and research results in the aviation and aerospace industries indicates a lack of development and recommendations for the use of statistical methods to assess the quality and reliability of pyrotechnic devices that are part of such important systems as propulsion systems, separation systems, structural elements of aircraft and other devices. The article presents a methodological approach to conducting a statistical assessment of the quality of pressed parts, as a result of which manufacturers of complex technical units and components will be given the opportunity to reduce the number of defects and alterations, optimize the production process and increase labor productivity. In addition, the stable quality of components confirmed by the results of statistical analysis will ensure reliable operation of finished products extending their service life.
About the Authors
N. S. Khersonsky
SOYUZCERT LLC
Russian Federation
Russian Federation
Nikolai S. Khersonsky, Candidate of Technical Sciences, General Director
7, building 30, Viktorenko St., Moscow, 125167
L. G. Bolshedvorskaya
Moscow State Technical University of Civil Aviation
Russian Federation
Russian Federation
Ludmila G. Bolshedvorskaya, Doctor of Technical Sciences, Professor
20, Kronshtadtsky blvd, Moscow, 125493
References
1. Bazin S. A., Podmasteryev K. V. (2013). Analysis of the problems of applying statistical methods of quality control in the production of fasteners. Prospective development of science, technology and technology. № 1: 182-184. (in Russian)
2. Brish V. N., Starostin A. V., Osipov Yu. R. (2016). Applicability of statistical methods of analysis and quality control of mechanical engineering products at different stages of production. Fundamental research. 12-4: 719-724. (in Russian)
3. Bryksin S. V., Muranov A. K., Kiselev D. A. [et al.]. (2024). New methods of using pyrotechnic means of causing precipitation to extinguish forest fires. Life safety technologies. 5: 27-33. (in Russian)
4. Efremov A. N., Yudin S. V. (2021). Application of statistical methods for analyzing defects of cadmium coating on steel. Izvestia of Tula State University. Technical sciences. 12: 332-337. (in Russian)
5. Emelyanov A. A., Rodionova Yu. A., Savkin A. L. (2017). Modeling and statistical control of procurement process risks. Automation of management processes. 2(48): 49-59. (in Russian)
6. Khersonsky N. S. (2011). Statistical methods in the tasks of management of the development, design, production and maintenance of products for various purposes. Moscow: «Eco-Press», 2011. 336 p. (in Russian)
7. Khersonsky N. S., Proshin V. V. (2008). Statistical methods for assessing the accuracy characteristics of dimensional chains of products and technological processes of their manufacture. Moscow: Typogr. FSUE Research Institute «Geodesy», 2008. 83 p. (in Russian)
8. Kuluev R. R., Kadirova D. A. K. (2019). Statistical methods of product quality control and management. European research: innovation in science, education and technology. 15-20. (in Russian)
9. Lemeshko E., Yashchenko V. V. (2023). Statistical methods as a tool for effective management of the production of finished metal products. Actual aspects of the modernization of the Russian economy. 101-106. (in Russian)
10. Nekrasov R. Yu., Tempel Yu. A. (2019). Conceptual model for controlling the geometric accuracy of parts processed on machines. Metal processing (technology, equipment, tools). 21(3): 6-16. (in Russian)
11. Quality control of mechanical engineering products. Edited by Ph.D. A. E. Artes. Moscow: Publishing House of Standards, 1974. 447 p. (in Russian)
12. Ravich G. S., Padera V. G. (2019). Selective quality control of serial production products based on the method of statistical evaluation of parameters. Quality management methods. 8: 22-26. (in Russian)
13. Redko L. A., Peskova E. S. (2011). Problems of applying statistical methods of quality control and management. Bulletin of Science of Siberia. 1(1): 203-205. (in Russian)
14. Rutsky D. V., Zhuliev S. I., Sivak B. A., Shelukhina Yu. M., Mozgovoy A. V. (2007). Stabilization of mechanical properties in heavy engineering products. Heavy engineering. 12: 26-28. (in Russian)
15. Zaks L. (1976). Statistical evaluation. Moscow: Publishing house «Statistics», 1976. 598 p. (in Russian)
Review
For citations:
Khersonsky N.S., Bolshedvorskaya L.G. Statistical methods for inspection of pressed parts. Crede Experto: transport, society, education, language. 2025;(3):56-70. (In Russ.) https://doi.org/10.51955/2312-1327_2025_3_56
Views:
10
JATS XML
Email this article 