Control of evaluating non-conforming products based on statistical methods
https://doi.org/10.51955/2312-1327_2022_3_33
Abstract
The purpose of this work is to determine the practical applicability of statistical methods for assessing the compliance of manufactured products with the requirements of regulatory documentation and substantiating the feasibility of strategic planning of their production range. The advantage of this study is the development of a universal algorithm for the system of applying statistical methods to control nonconforming products and reduce the number of defects caused by known and little-known causes. The reliability of the conclusions obtained is due to the results of experiments carried out as part of the technological process, the objects of which were cylindrical parts made by pressing from materials of various physical and chemical composition used in various industries: aviation, mechanical engineering, shipbuilding, defense, etc.
About the Authors
Nikolai S. Khersonsky
SOYUZCERT LLC
Russian Federation
Russian Federation
Candidate of Technical Sciences,
General Director
7, building 30, Viktorenko St.,Moscow, 125167
Ludmila G. Bolshedvorskaya
Moscow State Technical University of Civil Aviation
Russian Federation
Russian Federation
Doctor of Technical Sciences,
Professor of the Department of BP&ZhD
Kronstadtsky boulevard, 20, Moscow, 125993
References
1. Badyaev I. V., Davydov V. M. Control of nonconforming products in designing technological objects. Kachestvo v proizvodstvennyh i social'no-ekonomicheskih sistemah: sbornik nauchnyh trudov 4-j Mezhdunarodnoj nauchno-tekhnicheskoj konferencii. 2016, pp. 51-54. (In Russian)
2. Egorov M. K. Analysis of causes of nonconforming products on an example of Ishikawa chart. Problemy i perspektivy razvitiya Rossii: sbornik statej. 2019, pp. 55-58. (In Russian)
3. Girilovich N. V., Dovgopolaya G. V. (2021) Application of statistical methods for analysis of nonconforming products in the production process. Lit'e i metallurgiya, (3), 40-45. (In Russian)
4. Hersonskij N. S. Statistical methods in tasks of management of developing, designing, producing and serving products of different purpose. Moscow, 2011. 336 p. (In Russian)
5. Kalita P. YA. The world of quality. Business lyrics and journalism. Moscow, 2014. 376 p. (In Russian)
6. Kendall M. D., St'yuart A. Statistical conclusions and connections. Moscow, 1973. 466 p. (In Russian)
7. Kimlichenko N. V., Zolotuhina D. A., YAgovkin M. S. Statistical methods for analysis of controlling nonconforming products. Tradicionnaya i innovacionnaya nauka: istoriya, sovremennoe sostoyanie, perspektivy: sbornik statej. 2015, pp. 51-52. (In Russian)
8. Legezina G. I. (2019) Application of Pareto chart for controlling nonconforming products. Izvestiya vysshih uchebnyh zavedenij. Tekhnologiya legkoj promyshlennosti. 45 (3), 113-116. (In Russian)
9. Loginova I. V., Magarina E. G. (2018) Analysis of controlling nonconforming products. Radioelektronnaya tekhnika. 1 (11), 201-205. (In Russian)
10. Metodicheskie ukazaniya. Metodika vybora i optimizacii kontroliruemyh parametrov tekhnologicheskih processov. RDMU 109-77. M., Izdatel'stvo standartov, 1978. 63 p. (In Russian)
11. Povodyreva M. S. (2013) Account of defects and losses related to outcome of nonconforming products. Izvestiya Issyk-Kul'skogo foruma buhgalterov i auditorov stran Central'noj Azii. 2(2), 114-118. (In Russian)
12. Poprushko E. YU., Hodyrevskaya S. V. Analysis of controlling nonconforming products at ZAO «KEAZ». Kachestvo v proizvodstvennyh i social'no-ekonomicheskih sistemah: sbornik statej, 2014, pp. 243-247. (In Russian)
13. Ventcel' E. S. Probability theory. Мoscow, 1962. 564 p. (In Russian)
14. Zaks L. Statistical estimation. Statistika. Moscow, 1976. 598 p. (In Russian)
Review
For citations:
Khersonsky N.S., Bolshedvorskaya L.G. Control of evaluating non-conforming products based on statistical methods. Crede Experto: transport, society, education, language. 2022;(3):33-47. (In Russ.) https://doi.org/10.51955/2312-1327_2022_3_33
Views:
15
JATS XML
Email this article 